Engine
+
Engine Model
Cat® C15
Net Power - SAE J1349:2011
405 hp
Rated Speed
1800 r/min
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Gross Power - SAE J1995:2014
434 hp
Peak Net Torque (1,300 rpm)
1479 lbf·ft
Torque Rise
33%
Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V)
9298 ft
Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA)
9098 ft
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300 r/min
Low Idle Speed
800 r/min
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2)
Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Operating Specifications
+
Hydraulic System - Lift/Tilt
+
Pump Flow at 1,800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495 psi
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 1070 mm (4.7 in × 42.1 in)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
140 mm × 230 mm (5.5 in × 9.1 in)
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Variable displacement piston
Max Flow at 1,800 rpm
44.9 gal/min
Relief Valve Setting - Steering
3481 psi
Vehicle Articulation Angle
86°
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Hydraulic System - Implement/Steering
56.5 gal (US)
Note (1)
All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases***: • Up to B20 biodiesel (FAME)** • Up to 100% HVO and GTL renewable fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with aftertreatment devices can use up to B20. Engines with no aftertreatment devices can use higher blends, up to B100. *** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Air Conditioning System
+
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes (3.15 tons).
Axles
+
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±11°
Braking System
+
Parking Brake
Drum and shoe, spring applied, hydraulic released
Brakes
Multi-disc wet (enclosed) 4 WHL
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate)
+
Height to Top of Beacon
14.5 ft
Height - Top of Exhaust Stack
14.2 ft
Height - Top of Hood
10.5 ft
Ground Clearance - Bumper
2.8 ft
Centerline of Rear Axle to Edge of Bumper
9.3 ft
Centerline of Front Axle to Hitch
6.1 ft
Wheel Base
12.1 ft
Length - With Blade on Ground - Straight Blade
27.6 ft
Ground Clearance to Trunnion
1.45 ft
Height - Top of Cab
13.5 ft
Width Over Guardrails
10.94 ft
Ground Clearance
1.8 ft
Straight Push Plate Blade
+
Engine
+
Engine Model
Cat® C15
Net Power - SAE J1349:2011
405 hp
Rated Speed
1800 r/min
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Gross Power - SAE J1995:2014
434 hp
Peak Net Torque (1,300 rpm)
1479 lbf·ft
Torque Rise
33%
Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V)
9298 ft
Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA)
9098 ft
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300 r/min
Low Idle Speed
800 r/min
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2)
Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Operating Specifications
+
Hydraulic System - Lift/Tilt
+
Pump Flow at 1,800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495 psi
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 1070 mm (4.7 in × 42.1 in)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
140 mm × 230 mm (5.5 in × 9.1 in)
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Variable displacement piston
Max Flow at 1,800 rpm
44.9 gal/min
Relief Valve Setting - Steering
3481 psi
Vehicle Articulation Angle
86°
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Hydraulic System - Implement/Steering
56.5 gal (US)
Note (1)
All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases***: • Up to B20 biodiesel (FAME)** • Up to 100% HVO and GTL renewable fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with aftertreatment devices can use up to B20. Engines with no aftertreatment devices can use higher blends, up to B100. *** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Air Conditioning System
+
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes (3.15 tons).
Axles
+
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±11°
Braking System
+
Parking Brake
Drum and shoe, spring applied, hydraulic released
Brakes
Multi-disc wet (enclosed) 4 WHL
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate)
+
Height to Top of Beacon
14.5 ft
Height - Top of Exhaust Stack
14.2 ft
Height - Top of Hood
10.5 ft
Ground Clearance - Bumper
2.8 ft
Centerline of Rear Axle to Edge of Bumper
9.3 ft
Centerline of Front Axle to Hitch
6.1 ft
Wheel Base
12.1 ft
Length - With Blade on Ground - Straight Blade
27.6 ft
Ground Clearance to Trunnion
1.45 ft
Height - Top of Cab
13.5 ft
Width Over Guardrails
10.94 ft
Ground Clearance
1.8 ft
Straight Push Plate Blade
+
Engine
+
Engine Model
Cat® C15
Net Power - SAE J1349:2011
405 hp
Rated Speed
1800 r/min
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Gross Power - SAE J1995:2014
434 hp
Peak Net Torque (1,300 rpm)
1479 lbf·ft
Torque Rise
33%
Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V)
9298 ft
Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA)
9098 ft
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300 r/min
Low Idle Speed
800 r/min
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2)
Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Operating Specifications
+
Hydraulic System - Lift/Tilt
+
Pump Flow at 1,800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495 psi
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 1070 mm (4.7 in × 42.1 in)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
140 mm × 230 mm (5.5 in × 9.1 in)
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Variable displacement piston
Max Flow at 1,800 rpm
44.9 gal/min
Relief Valve Setting - Steering
3481 psi
Vehicle Articulation Angle
86°
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Hydraulic System - Implement/Steering
56.5 gal (US)
Note (1)
All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases***: • Up to B20 biodiesel (FAME)** • Up to 100% HVO and GTL renewable fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with aftertreatment devices can use up to B20. Engines with no aftertreatment devices can use higher blends, up to B100. *** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Air Conditioning System
+
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes (3.15 tons).
Axles
+
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±11°
Braking System
+
Parking Brake
Drum and shoe, spring applied, hydraulic released
Brakes
Multi-disc wet (enclosed) 4 WHL
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate)
+
Height to Top of Beacon
14.5 ft
Height - Top of Exhaust Stack
14.2 ft
Height - Top of Hood
10.5 ft
Ground Clearance - Bumper
2.8 ft
Centerline of Rear Axle to Edge of Bumper
9.3 ft
Centerline of Front Axle to Hitch
6.1 ft
Wheel Base
12.1 ft
Length - With Blade on Ground - Straight Blade
27.6 ft
Ground Clearance to Trunnion
1.45 ft
Height - Top of Cab
13.5 ft
Width Over Guardrails
10.94 ft
Ground Clearance
1.8 ft
Straight Push Plate Blade
+
Engine
+
Engine Model
Cat® C15
Net Power - SAE J1349:2011
405 hp
Rated Speed
1800 r/min
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Gross Power - SAE J1995:2014
434 hp
Peak Net Torque (1,300 rpm)
1479 lbf·ft
Torque Rise
33%
Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V)
9298 ft
Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA)
9098 ft
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300 r/min
Low Idle Speed
800 r/min
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2)
Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Operating Specifications
+
Hydraulic System - Lift/Tilt
+
Pump Flow at 1,800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495 psi
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 1070 mm (4.7 in × 42.1 in)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
140 mm × 230 mm (5.5 in × 9.1 in)
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Variable displacement piston
Max Flow at 1,800 rpm
44.9 gal/min
Relief Valve Setting - Steering
3481 psi
Vehicle Articulation Angle
86°
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Hydraulic System - Implement/Steering
56.5 gal (US)
Note (1)
All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases***: • Up to B20 biodiesel (FAME)** • Up to 100% HVO and GTL renewable fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with aftertreatment devices can use up to B20. Engines with no aftertreatment devices can use higher blends, up to B100. *** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Air Conditioning System
+
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes (3.15 tons).
Axles
+
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±11°
Braking System
+
Parking Brake
Drum and shoe, spring applied, hydraulic released
Brakes
Multi-disc wet (enclosed) 4 WHL
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate)
+
Height to Top of Beacon
14.5 ft
Height - Top of Exhaust Stack
14.2 ft
Height - Top of Hood
10.5 ft
Ground Clearance - Bumper
2.8 ft
Centerline of Rear Axle to Edge of Bumper
9.3 ft
Centerline of Front Axle to Hitch
6.1 ft
Wheel Base
12.1 ft
Length - With Blade on Ground - Straight Blade
27.6 ft
Ground Clearance to Trunnion
1.45 ft
Height - Top of Cab
13.5 ft
Width Over Guardrails
10.94 ft
Ground Clearance
1.8 ft
Straight Push Plate Blade
+
Engine
+
Engine Model
Cat® C15
Net Power - SAE J1349:2011
405 hp
Rated Speed
1800 r/min
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Gross Power - SAE J1995:2014
434 hp
Peak Net Torque (1,300 rpm)
1479 lbf·ft
Torque Rise
33%
Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V)
9298 ft
Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA)
9098 ft
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300 r/min
Low Idle Speed
800 r/min
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2)
Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Operating Specifications
+
Hydraulic System - Lift/Tilt
+
Pump Flow at 1,800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495 psi
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 1070 mm (4.7 in × 42.1 in)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
140 mm × 230 mm (5.5 in × 9.1 in)
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Variable displacement piston
Max Flow at 1,800 rpm
44.9 gal/min
Relief Valve Setting - Steering
3481 psi
Vehicle Articulation Angle
86°
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Hydraulic System - Implement/Steering
56.5 gal (US)
Note (1)
All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases***: • Up to B20 biodiesel (FAME)** • Up to 100% HVO and GTL renewable fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with aftertreatment devices can use up to B20. Engines with no aftertreatment devices can use higher blends, up to B100. *** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Air Conditioning System
+
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes (3.15 tons).
Axles
+
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±11°
Braking System
+
Parking Brake
Drum and shoe, spring applied, hydraulic released
Brakes
Multi-disc wet (enclosed) 4 WHL
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate)
+
Height to Top of Beacon
14.5 ft
Height - Top of Exhaust Stack
14.2 ft
Height - Top of Hood
10.5 ft
Ground Clearance - Bumper
2.8 ft
Centerline of Rear Axle to Edge of Bumper
9.3 ft
Centerline of Front Axle to Hitch
6.1 ft
Wheel Base
12.1 ft
Length - With Blade on Ground - Straight Blade
27.6 ft
Ground Clearance to Trunnion
1.45 ft
Height - Top of Cab
13.5 ft
Width Over Guardrails
10.94 ft
Ground Clearance
1.8 ft
Straight Push Plate Blade
+
824 Wheel Dozer - Key Features (Global)
