Engine
+
Gross Power - SAE J1995:2014
435 hp
Net Power - SAE J1349:2011
405 hp
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Engine Model
C15 Cat®
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
1800
Torque Rise
33%
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300.0 r/min
Low Idle Speed
800.0 r/min
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
9298 ft
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
9098 ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
+
Operating Weight (Tier 4 Final/Stage V)
90207 lb
Operating Weight (Tier 3/Stage IIIA equivalent)
89186 lb
Maximum Operating Weight (Tier 4 Final/Stage V)
92568 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
91549 lb
Hydraulic System
+
Pump Flow at 1800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495.0 psi
Lift System
Double Acting Cylinder
Bore
4.7 in
Stroke
42.1 in
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
+
Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
±5°
Braking System
+
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Piston - Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
3481.0 psi
Vehicle Articulation Angle
86.0 °
Dimensions (Approximate)
+
Height to Top of Air Conditioning Condenser
14.99 ft
Height - Cab Roof
13.75 ft
Height - Top of Beacon
15.63 ft
Height - Top of Exhaust Pipe
14.56 ft
Height - Top of Hood
10.87 ft
Ground Clearance - Bumper
3.15 ft
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
9.38 ft
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
10.16 ft
Hitch to Centerline of Front Axle
6.07 ft
Wheel Base
12.14 ft
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
28.59 ft
Ground Clearance
2.11 ft
Width - Over Wheels
12.47 ft
Turning Radius - Inside of Wheels
9.18 ft
Straight Blade
+
Width – Moldboard Length
14.16 ft
Width - Over End Bits
14.75 ft
Height with Cutting Edge and Screen
6.23 ft
Maximum Depth of Cut
1.5 ft
Maximum Lift above Ground
4.19 ft
Capacity, Rated
16.1 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
28.59 ft
Semi U-Blade
+
Width – Moldboard Length
14.66 ft
Width - Over End Bits
14.83 ft
Height with Cutting Edge and Screen
6.63 ft
Maximum Depth of Cut
2.03 ft
Maximum Lift above Ground
3.825 ft
Capacity, Rated
20.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
29.54 ft
U-Blade
+
Width – Moldboard Length
14.25 ft
Width - Over End Bits
14.41 ft
Height with Cutting Edge and Screen
6.62 ft
Maximum Depth of Cut
2.03 mm
Maximum Lift above Ground
3.79 ft
Capacity, Rated
22.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
30.7 ft
Wheels
+
Combination Tips (Weight Group)
21,125 lb
Plus Tips - Weight (Group)
22,002 lb
Paddle Tips - Weight (Group)
20,540 lb
Diamond Tips Weight (Group)
23997 lb
Outside Diameter
77.6 in
Outside Diameter - Diamond
78.1 in
Drum Diameter
63.4 in
Drum Width
47.2 in
Feet Per Row
6
Feet Per Wheel
30
Replaceable
Weld On
Width Over Drums
3800 mm
Tip Height
179 mm
Tip Height - Diamond
7.25 in
Engine
+
Gross Power - SAE J1995:2014
435 hp
Net Power - SAE J1349:2011
405 hp
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Engine Model
C15 Cat®
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
1800
Torque Rise
33%
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300.0 r/min
Low Idle Speed
800.0 r/min
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
9298 ft
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
9098 ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
+
Operating Weight (Tier 4 Final/Stage V)
90207 lb
Operating Weight (Tier 3/Stage IIIA equivalent)
89186 lb
Maximum Operating Weight (Tier 4 Final/Stage V)
92568 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
91549 lb
Hydraulic System
+
Pump Flow at 1800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495.0 psi
Lift System
Double Acting Cylinder
Bore
4.7 in
Stroke
42.1 in
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
+
Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
±5°
Braking System
+
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Piston - Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
3481.0 psi
Vehicle Articulation Angle
86.0 °
Dimensions (Approximate)
+
Height to Top of Air Conditioning Condenser
14.99 ft
Height - Cab Roof
13.75 ft
Height - Top of Beacon
15.63 ft
Height - Top of Exhaust Pipe
14.56 ft
Height - Top of Hood
10.87 ft
Ground Clearance - Bumper
3.15 ft
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
9.38 ft
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
10.16 ft
Hitch to Centerline of Front Axle
6.07 ft
Wheel Base
12.14 ft
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
28.59 ft
Ground Clearance
2.11 ft
Width - Over Wheels
12.47 ft
Turning Radius - Inside of Wheels
9.18 ft
Straight Blade
+
Width – Moldboard Length
14.16 ft
Width - Over End Bits
14.75 ft
Height with Cutting Edge and Screen
6.23 ft
Maximum Depth of Cut
1.5 ft
Maximum Lift above Ground
4.19 ft
Capacity, Rated
16.1 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
28.59 ft
Semi U-Blade
+
Width – Moldboard Length
14.66 ft
Width - Over End Bits
14.83 ft
Height with Cutting Edge and Screen
6.63 ft
Maximum Depth of Cut
2.03 ft
Maximum Lift above Ground
3.825 ft
Capacity, Rated
20.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
29.54 ft
U-Blade
+
Width – Moldboard Length
14.25 ft
Width - Over End Bits
14.41 ft
Height with Cutting Edge and Screen
6.62 ft
Maximum Depth of Cut
2.03 mm
Maximum Lift above Ground
3.79 ft
Capacity, Rated
22.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
30.7 ft
Wheels
+
Combination Tips (Weight Group)
21,125 lb
Plus Tips - Weight (Group)
22,002 lb
Paddle Tips - Weight (Group)
20,540 lb
Diamond Tips Weight (Group)
23997 lb
Outside Diameter
77.6 in
Outside Diameter - Diamond
78.1 in
Drum Diameter
63.4 in
Drum Width
47.2 in
Feet Per Row
6
Feet Per Wheel
30
Replaceable
Weld On
Width Over Drums
3800 mm
Tip Height
179 mm
Tip Height - Diamond
7.25 in
Engine
+
Gross Power - SAE J1995:2014
435 hp
Net Power - SAE J1349:2011
405 hp
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Engine Model
C15 Cat®
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
1800
Torque Rise
33%
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300.0 r/min
Low Idle Speed
800.0 r/min
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
9298 ft
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
9098 ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
+
Operating Weight (Tier 4 Final/Stage V)
90207 lb
Operating Weight (Tier 3/Stage IIIA equivalent)
89186 lb
Maximum Operating Weight (Tier 4 Final/Stage V)
92568 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
91549 lb
Hydraulic System
+
Pump Flow at 1800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495.0 psi
Lift System
Double Acting Cylinder
Bore
4.7 in
Stroke
42.1 in
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
+
Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
±5°
Braking System
+
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Piston - Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
3481.0 psi
Vehicle Articulation Angle
86.0 °
Dimensions (Approximate)
+
Height to Top of Air Conditioning Condenser
14.99 ft
Height - Cab Roof
13.75 ft
Height - Top of Beacon
15.63 ft
Height - Top of Exhaust Pipe
14.56 ft
Height - Top of Hood
10.87 ft
Ground Clearance - Bumper
3.15 ft
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
9.38 ft
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
10.16 ft
Hitch to Centerline of Front Axle
6.07 ft
Wheel Base
12.14 ft
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
28.59 ft
Ground Clearance
2.11 ft
Width - Over Wheels
12.47 ft
Turning Radius - Inside of Wheels
9.18 ft
Straight Blade
+
Width – Moldboard Length
14.16 ft
Width - Over End Bits
14.75 ft
Height with Cutting Edge and Screen
6.23 ft
Maximum Depth of Cut
1.5 ft
Maximum Lift above Ground
4.19 ft
Capacity, Rated
16.1 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
28.59 ft
Semi U-Blade
+
Width – Moldboard Length
14.66 ft
Width - Over End Bits
14.83 ft
Height with Cutting Edge and Screen
6.63 ft
Maximum Depth of Cut
2.03 ft
Maximum Lift above Ground
3.825 ft
Capacity, Rated
20.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
29.54 ft
U-Blade
+
Width – Moldboard Length
14.25 ft
Width - Over End Bits
14.41 ft
Height with Cutting Edge and Screen
6.62 ft
Maximum Depth of Cut
2.03 mm
Maximum Lift above Ground
3.79 ft
Capacity, Rated
22.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
30.7 ft
Wheels
+
Combination Tips (Weight Group)
21,125 lb
Plus Tips - Weight (Group)
22,002 lb
Paddle Tips - Weight (Group)
20,540 lb
Diamond Tips Weight (Group)
23997 lb
Outside Diameter
77.6 in
Outside Diameter - Diamond
78.1 in
Drum Diameter
63.4 in
Drum Width
47.2 in
Feet Per Row
6
Feet Per Wheel
30
Replaceable
Weld On
Width Over Drums
3800 mm
Tip Height
179 mm
Tip Height - Diamond
7.25 in
Engine
+
Gross Power - SAE J1995:2014
435 hp
Net Power - SAE J1349:2011
405 hp
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Engine Model
C15 Cat®
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
1800
Torque Rise
33%
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300.0 r/min
Low Idle Speed
800.0 r/min
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
9298 ft
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
9098 ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
+
Operating Weight (Tier 4 Final/Stage V)
90207 lb
Operating Weight (Tier 3/Stage IIIA equivalent)
89186 lb
Maximum Operating Weight (Tier 4 Final/Stage V)
92568 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
91549 lb
Hydraulic System
+
Pump Flow at 1800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495.0 psi
Lift System
Double Acting Cylinder
Bore
4.7 in
Stroke
42.1 in
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
+
Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
±5°
Braking System
+
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Piston - Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
3481.0 psi
Vehicle Articulation Angle
86.0 °
Dimensions (Approximate)
+
Height to Top of Air Conditioning Condenser
14.99 ft
Height - Cab Roof
13.75 ft
Height - Top of Beacon
15.63 ft
Height - Top of Exhaust Pipe
14.56 ft
Height - Top of Hood
10.87 ft
Ground Clearance - Bumper
3.15 ft
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
9.38 ft
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
10.16 ft
Hitch to Centerline of Front Axle
6.07 ft
Wheel Base
12.14 ft
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
28.59 ft
Ground Clearance
2.11 ft
Width - Over Wheels
12.47 ft
Turning Radius - Inside of Wheels
9.18 ft
Straight Blade
+
Width – Moldboard Length
14.16 ft
Width - Over End Bits
14.75 ft
Height with Cutting Edge and Screen
6.23 ft
Maximum Depth of Cut
1.5 ft
Maximum Lift above Ground
4.19 ft
Capacity, Rated
16.1 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
28.59 ft
Semi U-Blade
+
Width – Moldboard Length
14.66 ft
Width - Over End Bits
14.83 ft
Height with Cutting Edge and Screen
6.63 ft
Maximum Depth of Cut
2.03 ft
Maximum Lift above Ground
3.825 ft
Capacity, Rated
20.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
29.54 ft
U-Blade
+
Width – Moldboard Length
14.25 ft
Width - Over End Bits
14.41 ft
Height with Cutting Edge and Screen
6.62 ft
Maximum Depth of Cut
2.03 mm
Maximum Lift above Ground
3.79 ft
Capacity, Rated
22.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
30.7 ft
Wheels
+
Combination Tips (Weight Group)
21,125 lb
Plus Tips - Weight (Group)
22,002 lb
Paddle Tips - Weight (Group)
20,540 lb
Diamond Tips Weight (Group)
23997 lb
Outside Diameter
77.6 in
Outside Diameter - Diamond
78.1 in
Drum Diameter
63.4 in
Drum Width
47.2 in
Feet Per Row
6
Feet Per Wheel
30
Replaceable
Weld On
Width Over Drums
3800 mm
Tip Height
179 mm
Tip Height - Diamond
7.25 in
Engine
+
Gross Power - SAE J1995:2014
435 hp
Net Power - SAE J1349:2011
405 hp
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Engine Model
C15 Cat®
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
1800
Torque Rise
33%
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300.0 r/min
Low Idle Speed
800.0 r/min
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
9298 ft
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
9098 ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
+
Operating Weight (Tier 4 Final/Stage V)
90207 lb
Operating Weight (Tier 3/Stage IIIA equivalent)
89186 lb
Maximum Operating Weight (Tier 4 Final/Stage V)
92568 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
91549 lb
Hydraulic System
+
Pump Flow at 1800 rpm
30.9 gal/min
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495.0 psi
Lift System
Double Acting Cylinder
Bore
4.7 in
Stroke
42.1 in
Service Refill Capacities
+
Cooling System
30.6 gal (US)
Engine Crankcase
9.0 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
+
Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
±5°
Braking System
+
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final / Stage V
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
+
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hydraulic System - Steering
+
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Piston - Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
3481.0 psi
Vehicle Articulation Angle
86.0 °
Dimensions (Approximate)
+
Height to Top of Air Conditioning Condenser
14.99 ft
Height - Cab Roof
13.75 ft
Height - Top of Beacon
15.63 ft
Height - Top of Exhaust Pipe
14.56 ft
Height - Top of Hood
10.87 ft
Ground Clearance - Bumper
3.15 ft
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
9.38 ft
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
10.16 ft
Hitch to Centerline of Front Axle
6.07 ft
Wheel Base
12.14 ft
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
28.59 ft
Ground Clearance
2.11 ft
Width - Over Wheels
12.47 ft
Turning Radius - Inside of Wheels
9.18 ft
Straight Blade
+
Width – Moldboard Length
14.16 ft
Width - Over End Bits
14.75 ft
Height with Cutting Edge and Screen
6.23 ft
Maximum Depth of Cut
1.5 ft
Maximum Lift above Ground
4.19 ft
Capacity, Rated
16.1 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
28.59 ft
Semi U-Blade
+
Width – Moldboard Length
14.66 ft
Width - Over End Bits
14.83 ft
Height with Cutting Edge and Screen
6.63 ft
Maximum Depth of Cut
2.03 ft
Maximum Lift above Ground
3.825 ft
Capacity, Rated
20.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
29.54 ft
U-Blade
+
Width – Moldboard Length
14.25 ft
Width - Over End Bits
14.41 ft
Height with Cutting Edge and Screen
6.62 ft
Maximum Depth of Cut
2.03 mm
Maximum Lift above Ground
3.79 ft
Capacity, Rated
22.9 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
30.7 ft
Wheels
+
Combination Tips (Weight Group)
21,125 lb
Plus Tips - Weight (Group)
22,002 lb
Paddle Tips - Weight (Group)
20,540 lb
Diamond Tips Weight (Group)
23997 lb
Outside Diameter
77.6 in
Outside Diameter - Diamond
78.1 in
Drum Diameter
63.4 in
Drum Width
47.2 in
Feet Per Row
6
Feet Per Wheel
30
Replaceable
Weld On
Width Over Drums
3800 mm
Tip Height
179 mm
Tip Height - Diamond
7.25 in
826 Landfill Compactor - Key Features (Global)
