988

580 hp

Cat® C18

1700/rpm

1500/rpm

588 hp

538 hp

5.7 in

7.2 in

1105 in³

2104 lbf·ft

58 %

Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emission standards.

Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.

112574 lb

4.7-13 m3 (6.2-17 yd3)

12.5 t

16 t

770 - 772

773 - 775

Cat planetary powershift

4.0 mile/h

7.2 mile/h

12.7 mile/h

21.6 mile/h

4.7 mile/h

8.3 mile/h

14.4 mile/h

Lock-up disabled

7.8 mile/h

13.9 mile/h

24.4 mile/h

5.0 mile/h

8.9 mile/h

15.8 mile/h

EH- Positive Flow Control, Flow Sharing

Variable displacement piston

153 gpm

4757 psi

210 mm × 1050 mm (8.7 in × 41.3 in)

266 mm × 685 mm (8.7 in × 27 in)

Variable displacement piston

551 psi

4.5 s

8.0 s

2.2 s

3.5 s

18.2 s

Pilot, load sensing

Piston, variable displacement

71.3 gpm

4351 psi

86 °

3.4 s

5.6 s

• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (3.9 lb) of refrigerant which has a CO2 equivalent of 2.574 metric tonnes (2.837 tons).

Fixed

Trunnion

13 °

ISO 3450:2011

ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

73 dB(A)

111 dB(A)

72 dB(A)

109 dB(A)

* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”

** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.

The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

73 dB(A)

112 dB(A)

72 dB(A)

110 dB(A)

* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”

** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.

The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

188 gal (US)

31.7 gal (US)

33 gal (US)

15.9 gal (US)

8.7 gal (US)

24.3 gal (US)

29 gal (US)

49.1 gal (US)

49.1 gal (US)

125.5 gal (US)

63.4 gal (US)

• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester)* – 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. • Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** • For pre-Tier 4 engines: Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels** up to: – 100% biodiesel FAME (fatty acid methyl ester)* – 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * For use of blends higher than 20% biodiesel, consult your Cat dealer. ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

13.8 ft

14.8 ft

10.9 ft

10.5 ft

14 ft

14.9 ft

39.3 ft

1.9 ft

11.9 ft

18.0 ft

24.5 ft

6.5 ft

13.8 ft

14.8 ft

10.9 ft

10.5 ft

15.3 ft

14.9 ft

40.7 ft

1.9 ft

13.3 ft

19.3 ft

25.8 ft

6.8 ft