Cat C32 Generator Set (US EPA Tier 4 / IMO III)

C32 Tier 4 / IMO III

BENEFITS

Emissions

Utilizes SCR Technology to enable U.S. EPA Tier 4 Final and IMO III emission regulations compliance while lowering operational costs

Control Strategy

Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs ; Extends emissions useful life ; Ensures compliance ; Flexible to urea quality

Fuel System

Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

Generator Set Specifications +

Minimum Rating
282 ekW
Maximum Rating
940 ekW
Frequency
60hz

Engine Specifications +

Rated Engine Speed
1800 rpm
Configuration
Vee-12, 4-stroke-Cycle-Diesel
Aspiration
Turbocharged-aftercooled aspiration
Bore
5.71 in
Stroke
6.38 in
Displacement
1959.0 in³
Governor
Electronic (A5 ECM)
Emissions
U.S. EPA Tier 4 Final certified / IMO III emissions certified (SCR required)
Generator
SR5 - Form Wound
Cooling
Heat exchanger, keel or radiator cooled
Oil Change Interval
750 hrs
Refill Capacity
Lube Oil System w/ oil filter change: 146 L (38.5 gal)

Generator Set Dimensions +

Length
167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width
59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height
70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Engine Dry Weight
15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Clean Emissions Module (CEM) - Dimensions +

6 Brick Z-Flow - Length
147.7 in
Dosing Cabinet - Weight
209 lb
6 Brick Z-Flow - Weight
1246 lb
6 Brick U-Flow - Weight
1235 lb
Dosing Cabinet - Height
22.8 in
6 Brick U-Flow - Width
56.9 in
6 Brick U-Flow - Length
85.0 in
Dosing Cabinet - Width
18.8 in
6 Brick Z-Flow - Width
43.5 in
6 Brick U-Flow - Height
23.5 in
Dosing Cabinet - Length
37.4 in
6 Brick Z-Flow - Height
23.5 in

AIR INLET SYSTEM

Separate circuit aftercooled (SCAC)
Closed crankcase fumes disposal

CONTROL SYSTEM

24V control system

COOLING SYSTEM

Heat exchanger or Keel Cooling
Watercooled exhaust manifold and turbocharger
Hard seawater lines – no flexible hoses
Flanges for cooling connections, ANSI or DIN

FUEL SYSTEM

Duplex fuel filters with hybrid fuel lines
Primary fuel filter with water separator installed on base frame

GENERATORS AND GENERATOR ATTACHMENTS

IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V

LUBE SYSTEM

Oil fill, simplex filter and dipstick

MOUNTING SYSTEM

Helical spring/rubber isolated mounting for vibration and structure borne noise reduction

GENERAL

Right or left hand service sides
Customer wiring and service tool connector

ALARM AND PROTECTION

MGCP III B control panel with Cat® Alarm and Protection System
IP44 generator protection

EXHAUST SYSTEM

Muffler
Water-in-fuel and exhaust temperature sensors
SOLAS approved spray shielding

CHARGING SYSTEM

Charging alternator

FUEL SYSTEM

Manual or electric fuel priming pump
Fuel cooler

LUBE SYSTEM

Duplex oil filters

STARTING SYSTEM

Starting motors – air, electric or redundant

Marine Generator Sets

C32 Tier 4 / IMO III

BENEFITS

Emissions

Control Strategy

Fuel System

Power Reserve

Certifications

Warranty

Service

Get a Quote for C32 Tier 4 / IMO III

AIR INLET SYSTEM

CONTROL SYSTEM

COOLING SYSTEM

FUEL SYSTEM

GENERATORS AND GENERATOR ATTACHMENTS

LUBE SYSTEM

MOUNTING SYSTEM

GENERAL

ALARM AND PROTECTION

EXHAUST SYSTEM

CHARGING SYSTEM

FUEL SYSTEM

LUBE SYSTEM

STARTING SYSTEM

MEDIA GALLERY

DOWNLOAD RESOURCES

BROWSE

SIMILAR EQUIPMENT

C280-16

LEARN MORE

C280-12

LEARN MORE

C280-8

LEARN MORE

C280-6

LEARN MORE

C32 ACERT Tier 3

LEARN MORE

C32 ACERT IMO II

LEARN MORE

SUBSCRIBE

THANK YOU!