730 EJ Articulated Haul Truck

Engine +

Engine Model
Cat® C13
Bore
5.1 in
Stroke
6.2 in
Displacement
763 in³
No Engine De-rating Below
12500 ft
Engine Model - U.S. EPA Tier 4 Final/EU Stage V
Cat C13
Peak Engine Torque Speed
1200 r/min
Net Power - SAE J1349:2011
367 hp
Gross Power - SAE J1995:2014
375 hp
Peak Engine Torque Gross (SAE J1995)
1579 ft·lbf
Net Power - ISO 14396
370 hp
Emissions
The 730 EJ meets Tier 4 Final and Stage V emission standards.
Note (4)
Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.
Note (3)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (2)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (1)
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (5)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Net (ISO 14396)
1564 ft·lbf

Weights +

Rated Payload
30 ton (US)

Body Capacities +

Heaped (SAE 2:1)
22.1 yd³
Struck
17.7 yd³

Transmission +

Forward - 1
5 mile/h
Forward - 2
9 mile/h
Forward - 3
14 mile/h
Forward - 4
21 mile/h
Forward - 5
29 mile/h
Forward - 6
34 mile/h
Reverse - 1
6 mile/h

Sound Levels +

Interior Cab
72 dB(A)
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.

Operating Weights +

Front Axle - Rated Load
1433 lb
Total - Loaded
117528 lb
Center Axle - Loaded
41502 lb
Rear Axle - Empty
11707 lb
Rear Axle - Rated Load
29156 lb
Front Axle - Loaded
35009 lb
Center Axle - Empty
12214 lb
Total - Rated Load
59745 lb
Front Axle - Empty
34723 lb
Total - Empty
58643 lb
Rear Axle - Loaded
41017 lb
Center Axle - Rated Load
29156 lb

Service Refill Capacities +

Fuel Tank
108.8 gal (US)
Cooling System
21.9 gal (US)
Hydraulic System
29.1 gal (US)
Engine Crankcase
10 gal (US)
Transmission
12.4 gal (US)
Final Drives/Differential
33 gal (US)
Output Transfer Gear Box
6.3 gal (US)
DEF Tank
5.3 gal (US)

Steering +

Lock to Lock
4.75 seconds @ 60 rpm

Standards +

Brakes
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2005
Cab - ROPS
ISO 3471 – 2008
Steering
ISO 5010 – 2007

Body Plate +

Type
High strength Brinell HB450 wear resistant steel

Turning Circle +

Turning Dimensions - Clearance Radius
318 in
Turning Dimensions - SAE Turning Radius
294 in
Turning Dimensions - Steer Angle - Left/Right
45°
Turning Dimensions - Inside Radius
152 in
Turning Dimensions - Aisle Width
214 in
Note
Dimensions are for machines equipped with 750/65 R25 tires.

Optimal Loader/Truck Pass Matching +

Hydraulic Excavators: 336F/336F XE - Passes
5–6
Note
An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Hydraulic Excavators: 349F/349F XE - Passes
4–5
Wheel Loaders: 966M/966M XE - Passes
4
Wheel Loaders: 972M/972M XE - Passes
3–4
Wheel Loader: 962M - Passes
4–5
Wheel Loader: 950M - Passes
5

Eject/Retract Times +

Retract Time
15 s
Eject Time
12 s

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Adjustable air vents
Combined gear selection and eject control lever
Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted
Air conditioning with R134A refrigerant
Heater and defroster with four-speed fan
Mirrors: extensive arrangement for improved visibility
Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Eject control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp
Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Machine Security System (MSS) ready
– Secondary steering energy source engaged
– Hour meter
– Retarder active
Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt
Secondary steering – electro hydraulic
Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook
Sun visor
Tilt and telescopic steering wheel
Touchscreen display incorporating the rearview camera video feed
Retractable belt: Operator seat and second seat
Windows opening both sides, tinted
Windshield wiper and washer, two speed, intermittent (front)
Windshield wiper and washer, two speed (rear)

CAT TECHNOLOGIES

Product Link: PLE631 or PLE641 dependent on location and licensing agreement
Cat Detect with Stability Assist

ELECTRICAL AND LIGHTING

Batteries (two) maintenance free
Electrical system: 24-volt, 10A 24- to 12-volt converter
Horn
Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators
Main disconnect switch
Remote starting receptacle (cables not included)

POWER TRAIN

Auto shift six-speed forward and one reverse transmission
Cat C13 engine
Cat Clean Emission Module (CEM) and exhaust aftertreatment package
Differentials: standard with automatic clutched inter- and cross-axle differential locks
Dual circuit oil immersed, enclosed brakes – all wheels
Retarder: engine compression brake
Three axle, six-wheel drive

SAFETY

Reverse alarm
Rearview camera
ROPS/FOPS cab

GUARDS

Rear window
Radiator
Crankcase
Axle
Front dump body spill guard

OTHER STANDARD EQUIPMENT

Mud flaps: wheel arch and body mounted with transportation tiebacks
S·O·S sampling valves
Tires, six 750/65 R25 radial
Vandalism protection: lockable caps
Sound suppression (only standard in Europe)
Underslung tailgate

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPTIONAL EQUIPMENT

Engine block heater
Cold weather start attachment
Cat Production Measurement payload monitoring system
Fast fuel fill
Cold weather coolant –51° C (–60° F)
Exhaust heated body
Ether start
Bluetooth radio stereo system
Auto lube installation for automatic greasing of bearings
Flashing LED beacon
Four-point seat belt
Fuel additive – anti-waxing
Heated rearview motorized mirrors
Machine Security System (MSS)
Product Link Elite: PLE631 (satellite), PLE641 (cellular)
Roof mounted High Intensity Discharge (HID) work lights
Sound suppression (only standard in Europe)
Heated/cooled seat
Infrared glass – high ambient cab
Window blinds
Wheel chocks

Three Axle Articulated Trucks

730 EJ

OVERVIEW

BENEFITS

MAXIMIZE PERFORMANCE

AUTOMATIC CONTROLS

HEAVY DUTY CONSTRUCTION

OPERATOR COMFORT AND CONTROL

BUILT TO PERFORM

TECHNOLOGY THAT GETS WORK DONE

BECAUSE UPTIME COUNTS

MORE SUSTAINABLE FUTURE

BUILT-IN SAFETY FEATURES