7295 Electric Rope Shovel

7295

OVERVIEW

One of our mid-range shovels, the Cat 7295 provides proven Cat AC IGBT electronics and a robust front end design. The 7295 provides a 50-ton (45-tonne) payload, plus three- and four-pass loading capability with the Cat 785 ,789 and 793 mining trucks for an optimal loading and hauling operation.

Dimensions +

Dipper Payload
50 t
Dipper Capacity
19.1-38.2 m3 (25-50 yd3)
Note
Dependent on application and material density.

Weights +

Working Weight - With Dipper and Standard Links
1748837 lb
Ballast - Furnished By Customer
352000 lb
Note (1)
These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2)
All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

Main Structures +

Ground Bearing Pressure
Ground bearing pressure is dependent upon many factors.
Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard
28.22 in
Ground Bearing Pressure - 182.9 cm (72 in) Treads
39 in
Upper Works Overall Width - Including Standard Walkways
41.33 in
Planetary Propel
Dual-motor independent drive.
Swing
Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
Ground Bearing Pressure - Total Effective Bearing Area
315.6 ft²
Hoist
A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.

Optimal Working Ranges* +

Dumping Height - With Clearance to Open Dipper Door
27.56 ft
Cutting Radius - Maximum
67.59 ft
Revolving Frame Tail Swing Radius
25.59 in
Radius of Level Floor
48.88 ft
Cutting Height - Maximum
45 ft
Note (1)
Optimal working ranges based on loading a Cat® 785D truck.
Note (2)
*All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

Lube System +

Type
Automatic, single-line system for open gear lubricant and grease.
Components (1)
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Components (2)
External fast fill from lower level.

Electrical +

Power Requirements - 60 Hz
4,160V, 7,200V
Power Requirements - Peak power
2886 HP
Drive
IGBT Acutrol drive system.
Power Requirements - Voltage
3 phase, 50/60 Hz, 7,200V
Power Requirements - 50 Hz
6,000V, 6,600V, 7,200V
Power Requirements - Average Power Demand
538-753 kW (721-1,010 hp)
Note
Other voltages available to suit customer requirements.

Front End +

Standard Rope Data - Retract - Diameter
2.25 in
Standard Rope Data - Dipper Trip - Diameter
0.625 in
Standard Rope Data - Boom Suspension - No.
4
Standard Rope Data - Crowd - No.
1
Standard Rope Data - Boom Suspension - Diameter
2.75 in
Components
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Standard Rope Data - Retract - No.
1
Standard Rope Data - Hoist - Diameter
2.375 in
Standard Rope Data - Crowd - Diameter
2.25 in
Standard Rope Data - Dipper Trip - No.
1
Crowd
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Standard Rope Data - Hoist - No.
2
Note
High impact ropes available as an option

Electric Rope Shovels

7295

OVERVIEW

Get a Quote for 7295

MEDIA GALLERY

DOWNLOAD RESOURCES

BROWSE

SIMILAR EQUIPMENT

7495 with Rope Crowd

LEARN MORE

7495 HD

LEARN MORE

7495 HF with Rope Crowd

LEARN MORE

7295

LEARN MORE

7395

LEARN MORE

Electric Rope Shovels

7295

OVERVIEW

Get a Quote for 7295

MEDIA GALLERY

DOWNLOAD RESOURCES

BROWSE

SIMILAR EQUIPMENT

7495 with Rope Crowd

LEARN MORE

7495 HD

LEARN MORE

7495 HF with Rope Crowd

LEARN MORE

7295

LEARN MORE

7395

LEARN MORE

SUBSCRIBE

THANK YOU!