854 Wheel Dozer - Ohio CAT

Engine +

Engine Model
Cat C32B
Gross Power
907 hp
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
900 hp
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
814 hp
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
907 hp
Emissions (Tier 2 Equivalent): Net Power ISO - 9249
823 hp
Rated Speed
1750 r/min
Bore
5.7 in
Stroke
6.4 in
Displacement
1958 in²
Peak Torque - 1,200 rpm
3139 lb/ft
Torque Rise
30 %
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)
Net torque rise meets SAE J139.
Note (3)
No engine derating required up to 3050 m (10,000 ft) altitude.

Weights +

Operating Weight
224,647 lb

Transmission +

Transmission Type
Cat Planetary Power Shift
Converter Drive - Forward 1
4.4 mile/h
Converter Drive - Forward 2
7.7 mile/h
Converter Drive - Forward 3
13.2 mile/h
Converter Drive - Reverse 1
4.8 mile/h
Converter Drive - Reverse 2
8.4 mile/h
Converter Drive - Reverse 3
14.6 mile/h
Direct Drive - Forward 1
Lock-up disabled
Direct Drive - Forward 2
8.1 mile/h
Direct Drive - Forward 3
14.2 mile/h
Direct Drive - Reverse 1
5 mile/h
Direct Drive - Reverse 2
8.9 mile/h
Direct Drive - Reverse 3
15.6 mile/h
Note
Travel speeds based on 45/65-45 L-5 46 ply tires.

Hydraulic System - Lift/Tilt +

Output at 1,850 rpm and 6900 kPa (1,000 psi)
161 gal/min
Cylinders, Double Acting - Lift, Bore and Stroke
177 mm × 1760 mm (0.58 ft × 5.8 ft)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
267 mm × 286 mm (0.88 ft × 0.94 ft)

Service Refill Capacities +

Fuel Tank - Standard
413 gal (US)
Cooling System
53 gal (US)
Crankcase
32 gal (US)
Transmission
45 gal (US)
Differential - Final Drives - Front
98 gal (US)
Differential - Final Drives - Rear
90 gal (US)
Hydraulic System - Steering and Engine Cooling Fan - Tank Only
77 gal (US)
Note (1)
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfer or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf

Axles +

Front
Fixed
Rear
Trunnion

Brakes +

Brakes
Meets ISO 3540:2011

Blades +

Blade Capacities
30.5 to 44.8 m3 (40 to 58.6 yd3)

Dimensions (Approximate) +

Height - Top of ROPS
18.25 ft
Height - Top of Exhaust Pipe
17.17 ft
Height - Top of Hood
13 ft
Ground Clearance
27 in
Centerline of Front Axle to Hitch
9.67 ft
Centerline of Rear Axle to Edge of Bumper
13.75 ft
Wheel Base
19.25 ft
Length - With Blade on Ground
44 ft

Hydraulic System - Steering +

Steering System - Pump
Piston, variable displacement
Minimum Turning Radius - Over Blade
31 ft
Steering System - Circuit
Pilot, load sensing
Total Steering Angle
86 degrees
Relief Valve Setting
5004 psi

Operating Specifications +

Operating Weight
224647 lb

Sound Performance Levels +

Sound Performance
• The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Air Conditioning System +

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Cab +

ROPS/FOPS
ISO 3471:2008 and ISO 3449:2005 Level II Standards

ELECTRICAL AND LIGHTING

Alternator, 150 amp
Batteries, maintenance free (4 – 1,400 CCA)
Battery disconnect and jump start receptacle, bumper
Deutsch terminal connectors
Electrical system, 24V
Electronic transmission control
Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
Starter lockout in bumper
Starting and charging system, 24V
Transmission lockout in bumper

POWERTRAIN

Brakes, oil cooled, multi-disc, service/secondary
Engine brake
Engine, Cat C32B
Fuel priming pump (electric)
Ground level engine shutoff
Axle oil coolers (front and rear)
Pre-cleaner, engine air intake (above hood)
Radiator, Aluminum Modular (AMR)
Starting aid, (ether) automatic
Throttle lock electronic
Torque converter, impeller clutch with lock-up clutch (ICTC) and rimpull control system
Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)

OPERATOR ENVIRONMENT

Advisor display, displays real time operating information, performs calibrations and customizes operator setting
Air conditioner and heater with automatic temperature control
Air pre-cleaner, powered
Cab, sound-suppressed pressurized, separate external rollover protective structure (ROPS/FOPS)
Cigar lighter and ashtray
Coat hook
Converter (12V, 10-15 amp) and power port
Digital display on center console: gear, ground speed, machine hours
Electro-hydraulic blade controls, joystick
Heater and defroster
Horn, electric
Instrumentation, gauges: engine coolant temperature, fuel level, hydraulic oil temperature, powertrain oil temperature, tachometer
Instrumentation, warning indicators: action alert system – three categories, automatic transmission model enable status, brake malfunction, bucket float status, delayed engine shutdown status, engine idle shutdown status, engine malfunction, fuel economy mode enable status, hydraulic lockout, lockup clutch enable status, low fuel level, parking brake status, rimpull control enable status, seat belt warning, secondary steering (if equipped), throttle lock status, transmission gear
Light, cab, dome
Lunchbox and beverage holders
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
Radio, AM/FM with Bluetooth®, USB Port, 3.5 mm (0.14 in) auxiliary (AUX) input
Tinted glass
Wet-arm wipers/washers (front, rear, and corner) – intermittent front wiper

SAFETY

Alarm, back-up
Camera, rear vision
Emergency platform egress
Implement lock out switch
LED warning strobe
Mirrors, rearview (externally mounted)
Seat belt, retractable, 76 mm (3 in) wide
Separate external protective structure (ROPS/FOPS)
Stairway, left and right rear access
Steering and transmission lock lever, cab
Steering, secondary
Seat, trainer with lap belt,
76 mm (3 in) wide
Toe kicks

SERVICE

Automatic Lubrication System greases the hitch, steering, and axle trunnion bearings
Axle ecology drains
Battery disconnect and jump start receptacle, bumper
Case drain filters
Coupling, Cat O-ring face seals
Engine, crankcase, 500 hour interval with CH4
Front walkway around cab
Guards, crankcase and power train
Ground-level fast fill fuel system
Ground-level service center with Electronic Technician (ET) port, fast fill fluid ports, ecology drains
Grouped/Labeled lube points
Hitch, drawbar with pin
Hoses, Cat XT™
Oil sampling valves
Starter and Transmission lockouts in bumper
Sight gauges for steering, implement and transmission oil
Vital Information Management System (VIMS™) 3G with graphical information display: external data port, customizable operator profiles

COOLING

Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])

COLD WEATHER

Heated Seat

EFFICIENCY

Economy mode with on-demand throttle
Positive Flow Control implement system
Impeller Clutch Torque Converter (ICTC) with lock-up clutch
Load-sensing steering
Soft detent controls
Engine idle management features: auto idle kickdown, delayed engine shutdown, engine idle shutdown

TRAMMING

Front Fenders