725 Articulated Haul Truck

Engine +

Engine Model
Cat C9.3
Bore
4.5 in
Stroke
45.2 in
Displacement
567.5 in³
Peak Engine Torque Gross (SAE J1995)
1275 ft·lbf
Gross Power - SAE J1995:2014
342 hp
Net Power - ISO 14396
338 hp
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
Cat® C9.3
No Engine De-rating Below
3000 ft
Peak Engine Torque Net (SAE J1349)
1263 ft·lbf
Net Power - SAE J1349:2011
334 hp
Peak Engine Torque Speed
1200 r/min
Note (1)
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note (3)
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.

Weights +

Rated Payload
26.5 ton (US)

Body Capacities +

Heaped (SAE 2:1)
19.6 yd³
Struck
14.4 yd³
Tailgate Heaped SAE 2:1
20.4 yd³
Tailgate Struck
14.5 yd³

Transmission +

Forward - 1
5 mT/hr
Forward - 2
9.4 mT/hr
Forward - 3
14.4 mT/hr
Forward - 4
22.1 mT/hr
Forward - 5
30.7 mT/hr
Forward - 6
36.3 mT/hr
Reverse - 1
5.5 mT/hr

Sound Levels +

Interior Cab
69 dB(A)
Note (1)
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights +

Total - Loaded
103886 lb
Rear Axle - Rated Load
23699 lb
Total - Empty
50975 lb
Total - Rated Load
52910 lb
Center Axle - Loaded
33944 lb
Front Axle - Rated Load
5511 lb
Center Axle - Rated Load
23699 lb
Center Axle - Empty
10242 lb
Rear Axle - Loaded
33457 lb
Front Axle - Loaded
36484 lb
Rear Axle - Empty
9757 lb
Front Axle - Empty
30974 lb

Body Plate Thickness +

Side Plates
0.43 in
Front Plate
0.28 in
Base Plate
0.51 in

Service Refill Capacities +

Fuel Tank
91.0 gal (US)
Cooling System
18.0 gal (US)
Hydraulic System
29.1 gal (US)
Engine Crankcase
8 gal (US)
Transmission
10.0 gal (US)
Final Drives/Differential
33 gal (US)
Output Transfer Gear Box
5.0 gal (US)
DEF Tank
4.0 gal (US)
Steering/Hoist Hydraulic System
24.0 gal (US)
Final Drive - Each
1.6 gal (US)

Body Hoist +

Raise Time
10 s
Lower Time
8 s

Steering +

Lock to Lock
4.75 seconds @ 60 rpm

Standards +

Brakes
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2008
Cab - ROPS
ISO 3471 – 2008
Steering
ISO 5010 – 2007

Body Plate +

Type
High strength Brinell HB450 wear resistant steel

Turning Circle +

Turning Dimensions - Inside Radius
153 in
Turning Dimensions - Aisle Width
210 in
Turning Dimensions - SAE Turning Radius
294 in
Turning Dimensions - Clearance Radius
318 in
Turning Dimensions - Steer Angle - Left/Right
45°
Note
Dimensions are for machines equipped with 23.5R25 tires.

Optimal Loader/Truck Pass Matching +

Wheel Loader: 950M - Passes
5
Wheel Loader: 962M - Passes
4-5
Wheel Loaders: 966M/966M XE - Passes
4
Hydraulic Excavators: 336F/336F XE - Passes
5-6
Wheel Loaders: 972M/972M XE - Passes
3-4
Hydraulic Excavators: 349F/349F XE - Passes
4-5

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Air conditioning with R134A refrigerant
Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp
Windows opening both sides, tinted
Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook
Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted
Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt
Tilt and telescopic steering wheel
Retractable belt: Operator seat and second seat
Adjustable air vents
Heater and defroster with four-speed fan
Sun visor
Touchscreen display incorporating the rearview camera video feed
Windshield wiper and washer, two speed, intermittent (front)
Combined gear selection and hoist control lever
Windshield wiper and washer, two speed (rear)
Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Machine Security System (MSS) ready
– Secondary steering energy source engaged
– Hour meter
– Retarder active
Secondary steering – electro hydraulic
Mirrors: extensive arrangement for improved visibility

CAT TECHNOLOGIES

Product Link
Cat Detect with Stability Assist

ELECTRICAL AND LIGHTING

Electrical system: 24-volt, 5A 24- to 12-volt converter
Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators
Main disconnect switch
Horn
Batteries (two) maintenance free
Remote starting receptacle (cables not included)

POWER TRAIN

Differentials: standard with automatic clutched inter- and cross-axle differential locks
Cat Clean Emission Module (CEM) and exhaust aftertreatment package
Cat C9.3 engine
Three axle, six-wheel drive
Retarder: engine compression brake
Dual circuit oil immersed, enclosed brakes – all wheels
Auto shift six-speed forward and single speed reverse transmission

SAFETY

Reverse alarm
Rearview camera
ROPS/FOPS cab

GUARDS

Front dump body spill guard, integral part of fabricated body
Crankcase
Axle
Rear window
Radiator

OTHER STANDARD EQUIPMENT

Vandalism protection: lockable caps
Mud flaps: wheel arch and body mounted with transportation tiebacks
Sound suppression (only standard in Europe)
S·O·S sampling valves
Tires, six 23.5R25

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPTIONAL EQUIPMENT

Cold weather coolant –51° C (–60° F)
Infrared glass – high ambient cab
Auto lube installation for automatic greasing of bearings
Cold weather start attachment
Bare chassis (no body) standard wheel base
Roof mounted High Intensity Discharge (HID) work lights
Product Link Elite: PLE641 (cellular). Product Link is optional.
Heated/cooled seat
Exhaust heated body
Fuel additive – anti-waxing
Flashing LED beacon
Body liners
Ether start
Four-point seat belt
Machine Security System (MSS)
Cat Production Measurement payload monitoring system
Sound suppression (only standard in Europe)
Fast fuel fill
Wheel chocks
Engine block heater
Heated rearview motorized mirrors
Window blinds
Bluetooth radio stereo system
Scissor tailgate

Three Axle Articulated Trucks

725

OVERVIEW

BENEFITS

MAXIMIZE PERFORMANCE

INDUSTRIAL GRADE TRANSMISSION

AUTOMATIC CONTROLS

POWERFUL EFFICIENCY

WORK IN COMFORT

BUILT TO PERFORM

HEAVY DUTY CONSTRUCTION

TECHNOLOGY THAT GETS WORK DONE