THE QUALITY YOU EXPECT.
THE SERVICE YOU DESERVE.
THE QUALITY YOU EXPECT.
THE SERVICE YOU DESERVE.
SAVE UP TO 50% OFF CAT® RUBBER TRACKS & TIRES
SAVE NOWThe PM820 is a high-production, half-lane milling machine with a cutting width of 2010 mm (79.1 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.
Powerful Cat® C18 twin-turbo engine meets regional emission standardsSmooth and efficient operation with Automatic Idle Control and multiple rotor speeds optimize output and demand on the engineHigh capacity cooling system keeps engine at ideal temperatures for optimal fuel efficiency and lower emissionsAutomatic load sensing on the rotor adjusts milling speed to prevent stalls and optimize production
Reliable track undercarriage leverages proven designs from Cat dozers and an automatic tensioning system to ensure consistent performance and longer track lifeRobust propel system features two independent propel pumps to drive two crawler tracks each, in a high-traction, cross-drive patternAutomatic traction control maintains consistent speed in the most challenging applicationsFour steering modes with advanced alignment and tracking provides precise steering geometry and reduces track pad wearAbility to electronically switch between rotor speeds during operation
High-capacity conveyors provide efficient removal of milled material with outstanding discharge controlA wide opening and seamless belt effectively clear the rotor chamberAdjust the belt speed to match material type and production rate, while the built in “boost” feature provides a temporary surge in belt speed to eject material faster and fartherThe belt reverses for faster clean-up, while magnetic vinyl covers provide quick access to inspect the rollers for wear
Operate in comfort with height-adjustable operating consoles and intuitive, ergonomic controlsRetractable handrails stow and redeploy easily when approaching obstaclesWork day or night with backlit keypads and illuminate the work area around the machine with wide-dispersion and perimeter LED lighting optionsUpgrade operator stations with optional suspension seats that reposition for improved visibility and comfortOptional remote cameras enhance visibility to the cutting edge and conveyorThe single post, forward-folding powered canopy option with overhead LED lighting and integrated side extensions quickly stows and redeploys during operation to clear overhead obstacles with the simple push of a button, and optional windscreens can be added for increased comfortMaximize dust removal from the working areas with the optional dust abatement system
The rotor drive system features a heavy-duty dry clutch, automatic belt-tensioning to prevent slippage and two high tensile (five-rib) belts to drive the rotorReinforced cutting chamber offers enhanced durabilityImproved access simplifies rotor changesHardened full length side plate skis, inboard ski shoe, and anti-slab shoes reduce wear and maintenance
Achieve accurate, repeatable and automatic cutting precision with the integrated Cat GRADE with Grade and Slope systemControl boxes can be repositioned without the need to reconfigure settings and the background color changes to night mode when the work lights are activatedObtain full control of grade and slope from any control boxSeamlessly switch between multiple grade sensors for uninterrupted accuracy during millingAdjust the speed at which the rotor drops into the cut for optimal machine controlSet and automate transitions in/out of cuts and save settings for future jobsClear obstacles in the cutting path with ease using the obstacle jump featureEnhance for full 3D milling operation (additional hardware required)
Cat System K rotors feature efficient material flow with an excellent cutting pattern for numerous applicationsA tapered dual-retention design secures toolholders in place without a retaining pin, bolt or setscrew, speeding up replacement and eliminating the need for fasteners or torqueingReversible paddles and high strength alloys reduce wear and abrasion to extend rotor lifeOptional diamond bits can extend replacement intervals up to 80 times longer than conventional carbide bits
Maintenance is easier and faster with large service doors and power hood for walk-in access to critical componentsMaintenance-free track components and easy to replace track pads lower service costsStandard ground-level controls and an optional electrically-operated rotor turning device with pendant simplify bit removal and replacementHigh and low pressure washdown options connect to the onboard water tank for convenient clean-upOperate select machine functions during maintenance and service with the accessory drive systemElectrical system wiring is color-coded and numbered for easy identification and wrapped in a protective, abrasion-resistant nylon braid for longer lifeExtended hydraulic oil service intervals: 3000 hours without oil sampling, 6000 hours with oil samplingTrack scheduled maintenance with Cat Product Link™ telematics servicesElectronic Control Modules (ECMs) monitor machine systems to alert the operator of performance issues and can be paired with Product Link options to enable additional remote services with your local Cat dealerMulti-piece, cartridge-style engine filters are environmentally friendly, reducing waste and lowering replacement costsConvenient parts availability, dealer locations and service repair kits simplify ordering of high wear components
Cat cold planers offer a variety of features and options designed to make daily operation and maintenance tasks easier.Pause and resume machine functions with the push of a button during truck exchangesOptional magnetic paint can holdersHooks for water hose storageAngled water fill connectionEasily accessible shovel holderTop and side view rotor depth indicatorsCompressed air connection in center operator console
The Cat C18 Twin Turbo engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.Cat U.S. EPA Tier 4 Final and EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.Automatic Idle Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.Automatic Load Control helps you save fuel and reduces greenhouse gas emissions by automatically matching milling speed to engine load for maximum production at peak efficiency.Standby/Resume pauses major machine functions and lowers engine speed to conserve fuel and helps reduce greenhouse gas emissions during truck exchanges.Traction Control maintains consistent traction to increase machine efficiency, helps reduce fuel burn and greenhouse gas emissions.The engine, fuel and hydraulic systems are equipped with ecology drains for easy servicing and to help prevent spillage.Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine: hydraulic oil 6000 hours with sampling, coolant 12000 hours with extender.Cat Scheduled Oil Sampling (S•O•S℠) Services helps reveal excessive wear, contaminated fluids or other “unseen” issues that can shorten component life. In many cases, you can extend oil and coolant change intervals by using fluid monitoring. Consult your Cat dealer or the machine’s operation and maintenance manual for more information.Cat Grade with Grade and Slope for cold planers allows for accurate material planning to help reduce overages during the paving process and increase final project quality for a longer lasting road surface.Don’t waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.VisionLink displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Never miss out on the latest news & specials when you subscribe to Ohio CAT® marketing updates
PM820 Key Features and Benefits
